Back to Back - Grant Series with Nevamar® (ESD) Laminate Top
(With Modesty Panel, Work Surface and Support Frame and Legs Included)

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Series G workbenches allow the tops and options to be adjusted to any height desired

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or two ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

These benches normally come with ergonomic contoured front edges. These allow the operator to lay their arm across the edge without discontfort. We also offer "bumper edge" tops with contoured corners at no additional cost, but you have to ask. these are excellent where the formica might get chipped and when used in high traffic areas, eliminating minor injuries from bumps.

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Series G workbenches allow the tops and options to be adjusted to any height desired

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or two ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

These benches normally come with ergonomic contoured front edges. These allow the operator to lay their arm across the edge without discontfort. We also offer "bumper edge" tops with contoured corners at no additional cost, but you have to ask. these are excellent where the formica might get chipped and when used in high traffic areas, eliminating minor injuries from bumps.

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Series G workbenches allow the tops and options to be adjusted to any height desired

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or two ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

These benches normally come with ergonomic contoured front edges. These allow the operator to lay their arm across the edge without discontfort. We also offer "bumper edge" tops with contoured corners at no additional cost, but you have to ask. these are excellent where the formica might get chipped and when used in high traffic areas, eliminating minor injuries from bumps.