You are here: Home > Kennedy Series > ESD Laminate Options > Nevamar™ Static Control Laminate
 
 
Kennedy Series with Nevamar™ Static Control Laminate  
 
Nevamar Logo
Workbench - ESD Laminate
1-3 Day Shipp Promise
Workbench - Legs in Corners - K Series
Workbench shown with options
   
Hundreds of Styles and Colors
 
 
 

Kennedy Series with Nevamar™ Static Control Laminate

 
 
24" Deep  
Nevamar™ ESD Specifications
Fast and Easy Assembly
 
 
Order your workbench in any height without incurring additional cost.
 
 
Dimensions
D x L
Model Weight
24" x 24" KC2424 39
24" x 30" KC2430 44
24" x 36" KC2436 50
24" x 48" KC2448 63
24" x 60" KC2460 75
24" x 72" KC2472 100
24" x 96" KC2496 135
24" x 120" KC24120 169
 
 

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.

Note: The wider the table, the weaker the table. To counter this, our eight foot wide benches have 66% more steel in the understructure while ten foot wide benches have 207% more steel there. We recommend a Footrest for added stability on 8' and 10' benches.

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

Height:  All BenchPro™ workbenches are made to each customer's specific requirements.  You may select any work height for these benches without incurring an additional charge.  We also make them with optional manual height adjustment, crank-up height adjustment, and electric height adjustment . Custom work is rarely charged.

 
     
 
 
 
30" Deep  
Nevamar™ ESD Specifications
Fast and Easy Assembly
 
 
Order your workbench in any height without incurring additional cost.
 
 
Dimensions
D x L
Model Weight
30" x 30" KC3030 48
30" x 36" KC3036 63
30" x 48" KC3048 78
30" x 60" KC3060 92
30" x 72" KC3072 113
30" x 96" KC3096 142
30" x 120" KC30120 187
 
 

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.

Note: The wider the table, the weaker the table. To counter this, our eight foot wide benches have 66% more steel in the understructure while ten foot wide benches have 207% more steel there. We recommend a Footrest for added stability on 8' and 10' benches.

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

Height:  All BenchPro™ workbenches are made to each customer's specific requirements.  You may select any work height for these benches without incurring an additional charge.  We also make them with optional manual height adjustment, crank-up height adjustment, and electric height adjustment . Custom work is rarely charged.

 
     
 
 
 
36" Deep  
Nevamar™ ESD Specifications
Fast and Easy Assembly
 
 
Order your workbench in any height without incurring additional cost.
 
 
Dimensions
D x L
Model Weight
36" x 36" KC3636 69
36" x 48" KC3648 88
36" x 60" KC3660 107
36" x 72" KC3672 125
36" x 96" KC3696 174
36" x 120" KC36120 229
 
 

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.

Note: The wider the table, the weaker the table. To counter this, our eight foot wide benches have 66% more steel in the understructure while ten foot wide benches have 207% more steel there. We recommend a Footrest for added stability on 8' and 10' benches.

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

Height:  All BenchPro™ workbenches are made to each customer's specific requirements.  You may select any work height for these benches without incurring an additional charge.  We also make them with optional manual height adjustment, crank-up height adjustment, and electric height adjustment . Custom work is rarely charged.

 
     
 
 
 
48" Deep  
Nevamar™ ESD Specifications
Fast and Easy Assembly
 
 
Order your workbench in any height without incurring additional cost.
 
 
Dimensions
D x L
Model Weight
48" x 48" KC4848 110
48" x 60" KC4860 133
48" x 72" KC4872 160
48" x 96" KC4896 219
48" x 120" KC48120 265
 
 

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.

Note: The wider the table, the weaker the table. To counter this, our eight foot wide benches have 66% more steel in the understructure while ten foot wide benches have 207% more steel there. We recommend a Footrest for added stability on 8' and 10' benches.

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

Height:  All BenchPro™ workbenches are made to each customer's specific requirements.  You may select any work height for these benches without incurring an additional charge.  We also make them with optional manual height adjustment, crank-up height adjustment, and electric height adjustment . Custom work is rarely charged.

 
     
 
 
 
60" Deep  
Nevamar™ ESD Specifications
Fast and Easy Assembly
 
 
Order your workbench in any height without incurring additional cost.
 
 
Dimensions
D x L
Model Weight
60" x 60" KC6060 190
60" x 72" KC6072 220
60" x 96" KC6096 260
60" x 120" KC60120 310
 
 

Lead Time: Green 1-3 Days, Orange 3-5 Days, Black 5-10 Days.
Large & custom orders take slightly longer.

Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.

Note: The wider the table, the weaker the table. To counter this, our eight foot wide benches have 66% more steel in the understructure while ten foot wide benches have 207% more steel there. We recommend a Footrest for added stability on 8' and 10' benches.

MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties

All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame.  The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience.  BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.

To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.

Height:  All BenchPro™ workbenches are made to each customer's specific requirements.  You may select any work height for these benches without incurring an additional charge.  We also make them with optional manual height adjustment, crank-up height adjustment, and electric height adjustment . Custom work is rarely charged.

 
     
 
 
 
Frequent Questions