Lead Time:Green 1-3 Days, Orange 3-5 Days,Black 5-10 Days. Large & custom orders take slightly longer.
Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.
Note:Jefferson tables are built standard at 30". If you wish a higher or lower table, prices will be adjusted as shown below.
MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties
All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame. The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience. BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.
To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.
Lead Time:Green 1-3 Days, Orange 3-5 Days,Black 5-10 Days. Large & custom orders take slightly longer.
Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.
Note:Jefferson tables are built standard at 30". If you wish a higher or lower table, prices will be adjusted as shown below.
MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties
All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame. The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience. BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.
To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.
Lead Time:Green 1-3 Days, Orange 3-5 Days,Black 5-10 Days. Large & custom orders take slightly longer.
Note: Although our tops and shelves are very water resistant, they are not recommended for use where running water is present or where constant water spills are possible. These type of wet applications require 100% stainless steel tables which are available from lab and kitchen suppliers.
Note:Jefferson tables are built standard at 30". If you wish a higher or lower table, prices will be adjusted as shown below.
MAINTENANCE: Always clean ESD bench tops with good ammoniated detergent, rinsing with clear water. Do not use wax or anything that can leave a coating on the laminate since these may adversely affect or modify its electrical properties
All BenchPro™ ESD benches are only available with ergonomic contoured front edges. This way, the ESD laminate conducts the static charges all the way to the steel frame. The steel frame has two wrist strap jacks mounted on the top of the two front legs for convenience. BenchPro™ also provides two grounding wires to take the static from the frame to either an adjoining bench or to ground.
To guarantee a static clear work area, all BenchProâ„¢ ESD bench top have their edges laminated with the same static control laminates as used on the top, while the underside of the tops have a laminated solid aluminum sheet.
Special Height Table Price Adjustments
Jefferson tables are built standard at 30". If you wish a higher or lower table, prices will be adjusted as shown below.
